PLANET IGT-1205AT Industrial Gigabit Media Converter offers full port Gigabit speed. It provides very high reliability and security features to make sure the continuous operation in harsh environments such as control cabinet of transportation, factory, outdoors and places where extreme low or high temperatures can be experienced. Moreover, the IGT-1205AT is also compatible with 100Mbps and 1000Mbps SFP transceivers to provide a strong, stable and long-distance connection and flexible industrial networking deployment.

Redundancy Application

The IGT-1205AT industrial Gigabit Media Converter provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.

Features

Physical Port

1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured

Fiber Port Redundancy

Link status auto-detect and redundant on dual ports with the same connector type
Only Primary-Port is active at a time, the Backup-Port is blocked
When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically
Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port

Layer 2 Features

Supports auto negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
9K Jumbo Frame Size support
Integrated address look-up engine, support 1K absolute MAC addresses
Automatic address learning and address aging

Industrial Case / Installation

Slim IP30 metal case protection
DIN rail and wall mount design
Redundant Power Design:

- 12 to 48V DC, redundant power with polarity reverse protect function
- AC 24V power adapter acceptable

Supports EFT protection 6000 VDC for power line
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature

Specifications

Copper Port

1 x 10/100/1000Base-T RJ-45 TP
Auto-MDI/MDI-X, Auto-Negotiation

SFP / mini-GBIC Slots

2 1000Base-SX/LX/BX SFP interfaces (Port-1 and Port-2)
Compatible with 100Base-FX SFP

DIP Switch

DIP-1: SFP Port 1 1000Base-X (default) / 100Base-FX
DIP-2: SFP Port 2 1000Base-X (default)/ 100Base-FX
DIP-3: Switch mode / Fiber Redundant mode

Connector

Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2

Alarm

Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V

LED

3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Green: Power Fault
2 x LED for Per Copper Port:
Green: 1000 LNK/ACT
Orange:100 LNK/ACT
1 x LED for Per mini-GBIC interface (Port-1 and Port-2):
Green: LNK/ACT

ESD Protection

6KV DC

EFT Protection

6KV DC

Enclosure

IP30 type metal case

Installation

DIN rail kit and wall mount ear

Dimensions (W x D x H)

135 x 87 x 32mm

Weight

505g

Power Requirements

DC 12~48V or AC 24V
Redundant power with polarity reverses protection function

Power Consumption / Dissipation

4.8 watts/16BTU

Cable

Twisted-Pair
10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters
100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters
1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters
Fiber-Optic Cable
1000Base-SX:
50/125m or 62.5/125m multi-mode fiber optic cable, up to 550m
1000Base-LX:
9/125m single-mode fiber optic cable, up to 10/20/30/40/50/70/120
kilometers (vary on SFP module)
100Base-FX:
50/125m or 62.5/125m multi-mode fiber optic cable, up to 2
kilometers
9/125m single-mode fiber optic cable, up to 20/40/60 kilometers
(vary on SFP module)

Switch Specifications

Switch Processing Scheme

Store-and-Forward

Address Table

1K entries

Flow Control

Back pressure for half duplex
IEEE 802.3x pause frame for full duplex

Switch fabric

6Gbps

Throughput (packet per second)

4.46Mpps@64bytes

Maximum Transmit Unit

9216 bytes

Speed

SX/LX: 2000Mbps (full-duplex)
FX: 200Mbps (full-duplex)
TP: 10/20Mbps, 100/200Mbps, 2000Mbps

Standards Conformance

Standards Compliance

IEEE 802.3 Ethernet / 10Base-T
IEEE 802.3u Fast Ethernet / 100Base-TX
IEEE 802.3ab Gigabit Ethernet / 1000Base-T
IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX
IEEE 802.3x Full-Duplex Flow Control

Regulation Compliance

FCC Part 15 Class A, CE

Stability Testing

IEC60068-2-32(Free fall)
IEC60068-2-27(Shock)
IEC60068-2-6(Vibration)

Environment

Temperature

Operating:	-40~75 degrees C
Storage:	-40~75 degrees C

Humidity

Operating:	5~95% (non-condensing)
Storage:	5~95% (non-condensing)

Het spijt ons ... Dit product is niet meer beschikbaar