Model: Planet LRP-101CH

1-Port Long Reach PoE over coax Extender (Injector only)

Features

Power over Ethernet

• Eliminates power cabling with PoE over coaxial
• Supports Power over Ethernet PSE (PoE Injector)
• Power and Ethernet data transmission of 1,000m over coaxial cabling
• Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet PD on RJ45 port
• Supports Long Reach PoE power up to 30.8 watts (depending on power source and cable distance)
• Supports PoE Power up to 25 watts (depending on power source and cable distance)
• Auto detects remote powered device (PD)
• Plug and Play; no PC required

Industrial Case and Installation

• Supports extensive LED indicators for network diagnostics
• Metal case protection
• Compact size, DIN-rail and wall-mount design
• Supports EFT surge protection of 2kV DC for power line
• Supports Ethernet ESD protection of 4KV DC
• -20 to 70 degrees C operating temperature

Specifications

Hardware Specifications

• Ethernet Interface:
  • Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI/MDI-X
  • Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device)
  • PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC 
  • Data Rate: 100/100Mbps
  • Cabling: Cat5e or above
  • Maximum Distance: 100 meters
  • Maximum Frame Size: 1522 bytes
• Long Reach PoE Interface:
  • Connectivity: 1 x BNC female connector Long Reach PoE over coaxial PSE (Power Source Equipment)
  • Power Output: 41~56V DC
  • Power Pin Assignment:  
    • BNC center pole: DC+
    • BNC shield: DC-
  • Cabling: 
    • Coaxial cable: 75 ohm
    • RG-6/U cable, less than 12?/1,000ft.
    • RG-59/U cable, less than 30?/1,000ft.
  • Maximum Distance: 
    • Max. 200m with PoE+ output (656ft.)
    • Max. 600m with PoE output (1,968ft.)
    • Max. 1200m without PoE output (3,937ft.)
  • Long Reach Ethernet Standard: IEEE 1901
  • Modulation Type: Wavelet-OFDM 
  • Security: 128-bit AES encryption
  • Frequency Band: 2 ~ 28 MHz
  • Encryption: AES 128-bit
  • LRP Compatibility: LRP-101CE, 1-Port LRP Extender
• LED Indicators:
  • 4 x LEDs
  • PWR
  • LRP LNK
  • PoE IN
  • LNK/ACT
• ESD Protection: 4KV DC
• EFT Protection: 2KV
• Enclosure: Metal case
• Installation: Wall mount or DIN rail with optional kit
• Dimensions (W x D x H): 94 x 70 x 26 mm
• Weight: 200g    
• Power Requirements:
  • RJ45 PoE Input: 802.3at/af 48~56V DC
  • DC Input: 48~56V DC

Standards Conformance

• Standards Compliance:   
  • IEEE 802.3 10BASE-T Ethernet
  • IEEE 802.3u 100BASE-TX Fast Ethernet
  • IEEE 802.3af Power over Ethernet (802.3at Type 1)
  • IEEE 802.3at Power over Ethernet (802.3at Type 2)
• Regulation Compliance: FCC Part 15 Class A, CE

Environment

• Temperature:   
  • Operating: -20~70 degrees C
  • Storage: -40~75 degrees C
• Humidity:   
  • Operating: 5~95% (non-condensing)
  • Storage: 5~95% (non-condensing)