Overview
This unmanaged 16 port 10/100/1000Mbps PoE switch with 250W internal power, also with 2 gigabit SFP slots, provides an easier installation way for your PoE devices (IP cameras, VoIP, wireless AP, etc.).And it can detect your PoE devices according to PoE standard. So the users do not need to worry about the PoE switch will damage their PoE devices. The max transmission distance is 100 meters with Cat5 cables. Ideally, shorter cable will reduce the power degradation over the cables; with high quality cables also can reduce power loss. Plug & play design make the installation quite easy, users do not need any configuration, which make this PoE switch a very good choice for IP cameras, wireless AP, VoIP users.

Key Features

• 16 Port 10/100/1000Mbps PoE+ 2 Gigabit SFP slots
• Complies with the IEEE 802.3af standard
• Support MAC address auto-learning and auto-aging
• Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
• 250W internal power adapter
• Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
• 36 Gbps Switching Capacity
• Power pin: 12(+) 36(-)
  

Technical Specification

• Network Interface
  ·10M/100M/1000Mbps PoE RJ45 Port(1~16)
  ·10M/100M/1000Mbps Up-link Port(17~18)
• Data Rate: ·100M/1000Mbps Full Duplex ·Network Port:100BASE-T or 1000BASE-TX Ethernet RJ-45 Port
• Performance specification: ·Bandwidth:36Gbps 
  ·Network delay:
  100 to 1000M bps:Max 20 microseconds(64Byte)·  
  1000 to 1000M bps:Max 20 microseconds(64Byte)
  ·MAC Address Capacity: 8K
  · Frame Filtering and transmission rate:
  10M Max 14,800pps
  100M Max 148,800pps
    1000M Max 148,8000pps
• Protocols and Standards
  · IEEE802.3i 10BASE-T
  · IEEE802.3u 100BASE-TX
  · IEEE802.3x Flow Control
  · IEEE802.3af Power over Ethernet
  · IEEE 802.3,IEEE802.3ab,IEEE802.3az
• LED Indicators
  ·System, Power supply
  ·Speed: each port Link/ACT speed, 10/100M network mode, 1000M network mode, POE support POE supply
• Power Supply
  Input: 100 - 240 VAC, 50 -60 Hz
  250W internal power
  48VDC
• Dimensions: 440 x 290x 44 mm
• Environmental norms
  Operating Temperature: 0°C~40°C
  Storage Temperature: -10°C~70°C
  Operating Humidity: 10%~90% non-condensing
  Storage Humidity: 5%~90% non-condensing
• Certification: CE, FCC, RoHS