LPS2010GS PoE switch supports IEEE802.3af Standard, the maximum transfer distance is 100meters, supply power for devices that support IEEE802.3af standard, so the user does not need to worry that the PoE switch would damage the non-poe devices. And also when the PoE powered device is disconnected, the PoE switch will stop providing power. With simple and reliable design, PS2010G can identify the PoE demand, speed, duplex, and use the cable type AutoUplink automatically. PS2010GS mainly used for wireless AP and IP surveillance cameras, it can simplify the wiring of installation and reduce the cost.
Main Features
8 10/100/1000Mbps PoE port , 2 gigabit SFP port
Support IEEE 802.3af Standard
Maximum transfer distance is 100meters
Power for wireless AP and IP surveillance over Cat5 cable
Store-and-forward switching method
LED indicators for each port
Bandwidth: 20Gbps
Internal 150W power supply
Support L2 web management
Automatically detects the PoE class level of a Powered Device
Support single output automatic protection function and with self recovery capability
Transmission Rate: 100M/1000Mbps Full-duplex, network interface:100BASE-T / 1000BASE-TX RJ45 port
Features: Bandwidth: 20Gbps (Non-blocking) Packet forwarding rate: 14.88Mpps Mac Address: 8K Frame Filtering and transmission rate: 10M max for port 14,800pps 100M max for port 148,800pps 1000M max for port 148,8000pps
Network Protocol and Standards IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet
L2 web interface: IP address: 192.0.2.1 User name: admin Password:
LEDs Indicators: Power, LINK/ACT, PoE
Power supply: Max power: 150W (for ports 1-8)
Physical Specifications: Dimensions: 280 *180*44 mm, Weight: 2.5kg