Model: Witek SP3006F

Features

? Unmanaged PoE switch
? 4×10/100/1000 Base-T PoE+ and 2×1000 Base-X SFP ports
? Complies with IEEE 802.3af/at 30W PoE standard
? Smart DIP Switch?VLAN/Extend/QoS/PoE Watchdog
? - 40?~75? operating temperature
? 6kV surge immunity for power and Ethernet ports

Specifications

Interfaces

• Downlink Ports: 4*10/100/1000 Base-T PoE+ RJ-45(Auto-MDI/MDI-X)
• Uplink Ports: 2*1000 Base-X SFP
• Alarm Port: One power failure alarm relay output port. Alarm relay current carry ability: 1A@24VDC

PoE

• PoE Standard: IEEE 802.3af/at (PSE)
• PoE Power Supply Type: End-span
• PoE Pin Assignment: 1/2(+)?3/6(-)
• PoE Power Output: 46~55V DC
• PoE Power: 30W max for each port, 120W max

Switch Property

• Standards
  • IEEE 802.3 10Base-T Ethernet
  • IEEE 802.3u Fast Ethernet
  • IEEE 802.3ab Gigabit Ethernet
  • IEEE 802.3x Full-Duplex Flow Control
  • IEEE 802.3az Energy Efficient Ethernet
  • IEEE 802.3af Power-Over-Ethernet
  • IEEE 802.3at Power Over Ethernet Plus PSE
• Forwarding Modes: Store and Forward
• Packet Buffer: 2Mbit
• MAC Table: 16k
• Switching Capacity: 12Gbps
• Packet Forwarding Rate: 8.9Mpps
• Jumbo Frame: 10kB

Power Supply

• Input Voltage: Power 1 (Main): 44~57V DC, Power 2 (Backup): 44~57V DC
• Power Consumption: Full loading without PoE ? 6W
• PoE power budget: ? 120W
• Connector: Removable 6-pin terminal block
• Reverse polarity protection: Support
• Over-voltage protection: Support
• Over-current protection: Support

Environmental Reliability

• Industrial standard: 
  • EMI?FCC Part 15B Class A
  • Surge protection of power: IEC 61000-4-5 6KV/4KV?8/20us?
  • Surge protection of Ethernet ports?IEC 61000-4-5 6kV/2kV?10/700us?
  • RS: IEC 61000-4-3 80 MHz-1 GHz?10 V/m
  • EFT: IEC 61000-4-4 power interface: 4kV?Ethernet ports: 2kV
  • CS: IEC 61000-4-6 10V
  • ESD: IEC 61000-4-2 Level 4?8k/15k?
  • Shock: IEC 60068-2-27
  • Free fall: IEC 60068-2-32
  • Vibration: IEC 60068-2-6
• Operating Temperature: -40?~75?
• Storage Temperature: -40?~85?
• Operating Humidity: 5%~95% (Non-condensation)

LED Indicators

• P (Power indicator):
  • Off: the device is power off or failed Green On: the device power on is normal
  • Off: total PoE usage ? 50%
• S (PoE usage indicator):
  • Red blinking: 50% ? total
  • PoE usage ? 90%
  • Red on: total PoE usage ? 90%
• Copper ports
  • 1-4 Green indicators
    • Off: ports link down
    • On: ports link up
    • Blinking: data on TX/RX
  • 1-4 Yellow indicators 
    • Off: PoE not working
    • On: PoE working
• Fiber ports
  • 5-6 Fiber ports indicators
    • Off: ports link down
    • Green On: ports link up
    • Green Blinking: data on TX/RX

Physical

• Dimensions (W*D*H): 54*98*130mm
• Net Weight: 820g
• Installation: Desktop/DIN-rail

Certi?cations

• Certi?cations: CE, FCC, RoHS