Model: Planet WNAP-C3220E
300Mbps 802.11n Ceiling-mount Wireless Access Point (802.3af/at PoE, 10/100TX LAN)
Easy Installation and Management
With user-friendly Web UI and step-by-step Quick Setup Wizard, the WNAP-C3220E is easy to install, even for users who never experience setting up a wireless network. Furthermore, simply install our software controller, PLANET SAPC (Smart AP Control), to deliver wireless profiles to multiple APs simultaneously, thus making the central management simple.
Features
Wireless Standard Compliance
Secure Network Connection
Multiple Operation Modes and Wireless Features
Easy Deployment and Management
Specifications | |
Interfaces LAN | 1 x 10/100BASE-TX RJ45 port Auto-negotiation and auto MDI/MDI-X |
Antennas Gain | 2 x 5dBi antenna |
Button | Reset button (Press over 15 seconds to reset the device to the factory default) |
LED Indicators | Power |
Dimensions ( x H) | 159 x 45mm |
Weight | 161 ±5g |
Power Requirements | 48V 0.5A, IEEE 802.3af/at PoE+ |
Power Consumption | < 5W |
Mounting | Ceiling mount |
Wireless Interface Specifications | |
Standard | IEEE 802.11b/g/n 2.4GHz |
Media Access Control | CSMA/CA |
Data Modulation | Transmission/emission type: DSSS/OFDM Data modulation type: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK |
Frequency Range | FCC: 2.412~2.462GHz ETSI: 2.412~2.472GHz |
Operating Channels | FCC: 1~11 ETSI: 1~13 |
RF Power | FCC: up to 25 ± 1.5dBm ETSI: < 20dBm (EIRP) |
Receive Sensitivity | 2.4GHz: 802.11b(1Mbps):-95dBm 802.11b(11Mbps):-90dBm 802.11g(6Mbps):-92dBm 802.11g(54Mbps):-72dBm 802.11n(MCS0/MCS8):-92dBm 802.11n(MCS7/MCS15):-70dBm |
Software Features | |
LAN | Static IP Supports IP-MAC binding |
Wireless Mode | Access Point Gateway Repeater WDS (AP/Bridge/Station) |
Channel Width | 20MHz, 40MHz |
Encryption Security | 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X |
Wireless Security | Enable/Disable SSID Broadcast Wireless MAC address filtering User Isolation |
Wireless Advanced | WMM (Wi-Fi Multimedia): 802.11e Wireless QoS Multiple SSIDs: up to 4 Wireless Isolation: Enables to isolate each connected wireless client from communicating with each other Provides wireless statistics |
Max. SSIDs | 4 |
Max. Clients | 64 per radio (50 is suggested, depending on usage) |
Max. WDS Peers | 4 |
Wireless QoS | Supports Wi-Fi Multimedia (WMM) |
Wireless Advanced | Auto channel selection 5-level transmit power control (100%, 75%, 50%, 25%, 12.5%) Client limit control, coverage threshold Wi-Fi channel analysis chart |
Status Monitoring | Device status, wireless client List PLANET Smart Discovery DHCP client table System Log supports remote syslog server |
VLAN | IEEE 802.1Q VLAN (VID: 3~4094) SSID-to-VLAN mapping to up to 4 SSIDs |
Self-healing | Supports auto reboot settings per day/hour |
Management | Remote management through PLANET DDNS/ Easy DDNS Configuration backup and restore Supports UPnP Supports IGMP Proxy Supports PPTP/L2TP/IPSec VPN Pass-through SNMP v1/v2c/v3 support, MIB I/II, Private MIB |
Central Management [1] | Applicable controllers: WAPC-500, WAPC-1000 and Smart AP Control(SAPC) *Remarks[1]: the feature will be supported through firmware/system upgrade. |
Environment & Certification | |
Temperature | Operating: 0 ~ 40 degrees C Storage: -40 ~ 70 degrees C |
Humidity | Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 90% (non-condensing) |
Regulatory | CE, RoHS |