Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate
Backward compatible with 802.11a standard
Equipped with 10/100Mbps RJ45 ports for LAN and WAN with auto MDI/ MDI-X supported

Fixed-network Broadband Router

Supported connection types in WISP mode: Dynamic IP, Static IP, PPPoE
Supports Virtual Server and DMZ for various networking applications
Supports DHCP server, UPnP and PLANET Dynamic DNS

RF Interface Characteristics

Built-in RP-SMA antenna connectors
High Output Power up to 500mW with multiply-adjustable transmit power control

Outdoor Environmental Characteristics

IP55 enclosure
Passive Power over Ethernet design
Operating temperature: -20~70°C

Multiple Operations and Wireless Modes

Multiple operation modes: Bridge, WISP
Multiple wireless modes: AP, Client CPE (WISP), WDS PtP, WDS PtMP
Supports WMM (Wi-Fi Multimedia)

Reliable and Secure Network Connection

Supports Software Wi-Fi Protected Setup (WPS)
Advanced Security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP/AES) and 802.1x RADIUS authentication
Supports IP/Protocol-based access control and MAC filtering
Supports self-healing (Schedule Reboot) mechanism for reliable connection
TDMA Technology enhances greater wireless efficiency

Easy Installation and Management

Web-based UI and quick setup wizard for easy configuration
Planet Smart Discovery Utility allows administrator to discover and locate each AP
SNMP-based management interface
System status monitoring includes DHCP Client and System Log

Hardware
Standard Support	IEEE 802.11a/n IEEE 802.3 IEEE 802.3u IEEE 802.3x
Memory	64 Mbytes DDR SDRAM 16 Mbytes Flash
PoE	Passive PoE
Interface	Wireless IEEE802.11a/n, 2T2R PoE LAN (LAN 1): 1 x 10/100BASE-TX, auto-MDI/MDIX, passive PoE LAN 2: 1 x 10/100BASE-TX, auto-MDI/MDIX, passive PoE pass-through
Antenna	Built-in RP-SMA antenna connectors
Wireless RF Specifications
Wireless Technology	IEEE 802.11a IEEE 802.11n
Data Rate	IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps IEEE 802.11n (20MHz): up to 150Mbps IEEE 802.11n (40MHz): up to 300Mbp
Media Access Control	CSMA/CA
Modulation	Transmission/Emission type: OFDM Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band	5.180GHz ~ 5.825GHz
Operating Channel	5.180GHz CH36 5.580GHz CH116 5.200GHz CH40 5.600GHz CH120 5.220GHz CH44 5.620GHz CH124 5.240GHz CH48 5.640GHz CH128 5.260GHz CH52 5.660GHz CH132 5.280GHz CH56 5.680GHz CH136 5.300GHz CH60 5.700GHz CH140 5.320GHz CH64 5.745GHz CH149 5.500GHz CH100 5.765GHz CH153 5.520GHz CH104 5.785GHz CH157 5.540GHz CH108 5.805GHz CH161 5.560GHz CH112 5.825GHz CH165 *The 24 channels are defined by the theory. The actual application will vary based on the regulation in different regions and countries.
RF Output Power (Max.)	802.11a 25 ±1dBm 802.11n 24 ±1dBm
Receiver Sensitivity(dBm)	802.11a -94dBm 802.11n -93dBm
Output Power Control	12~27dBm
Software Features
LAN	Built-in DHCP server supporting static IP address distribution Supports 802.1d STP (Spanning Tree)
WAN	¦ Static IP ¦ Dynamic IP ¦ PPPoE
Operating Mode	¦ Bridge ¦ WISP
Firewall	NAT firewall with SPI (Stateful Packet Inspection) Built-in NAT server supporting virtual server and DMZ Built-in firewall with port/ IP address/ MAC/ URL filtering
Wireless Mode	¦ AP/ Router ¦ Client ¦ WDS PTP ¦ WDS PTMP ¦ WISP
Channel Width	20MHz / 40MHz
Wireless Isolation	Enable to isolate each connected wireless client to let them cannot access mutually
Encryption Type	64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x
Wireless Security	Wireless LAN ACL (Access Control List) filtering Wireless MAC address filtering Enable/Disable SSID Broadcast
Max. Wireless Clients	25
Max. WDS APs	8
Max. Wired Clients	60
WMM	Supports Wi-Fi multimedia
QoS	Supports Quality of Service for bandwidth control
NTP	Network Time Management
Self Healing	Supports Schedule Reboot
Management	Web UI, DHCP Client, Configuration Backup and Restore, Dynamic DNS, and SNMP
Diagnostic Tool	System Log, Ping Watchdog
Mechanical and Power
IP Level	IP55
Material	Outdoor UV Stabilized Enclosure
Dimensions (W x D x H)	127 x 63 x 254 mm
Weight	366g
Installation	Pole mounting or wall mounting
Power Requirements	LAN1 ¦ 24V DC, 1A/ Passive PoE ¦ Pin 4,5 V DC+ ¦ Pin 7,8 V DC- ¦ Pin 3 Reset
Power Consumption	12W
Environment and Certification
Operating Temperature	-20~70°C
Operating Humidity	10~95% non-condensing
Regulatory	CE, FCC, RoHS
Accessory
Standard Accessories	¦ WNAP-7335 x 1 ¦ 24V DC Passive PoE Injector & Power Cord x 1 ¦ Plastic Strap x 1 ¦ Quick Installation Guide x 1

Het spijt ons ... Dit product is niet meer beschikbaar