The WBS-200N is a cost-effective outdoor wireless solution for widely open space applications. It is definitely suitable to provide outdoor wireless connectivity for CPE users or bridging across long-ranging connection between suburban/rural areas through the 2.4GHz frequency band. With the built-in 8dBi dual-polarization directional antenna, the WBS-200N brings higher performance and longer distance of wireless connection. The WBS-200N provides high output power with multiply-adjustable Tx controller, which allows CPE users to easily install and adjust the suitable value in appropriate locations. When connecting with the WBS-200N, the system integrator is able to expand a reliable wireless connection from indoors to outdoors.

**We recommend you to match the WBS-200N with our related products to get the best results.

Features

Industrial Compliant Wireless LAN and LAN

Compliant with the IEEE 802.11b/g/n wireless technology
2T2R architecture with data rate of up to 300Mbps
Equipped with two 10/100Mbps RJ45 ports with auto MDI/MDI-X supported

Fixed Network Broadband Router

Supported WAN connection types in WISP mode: DHCP, Static IP, PPPoE, PPTP
Supports Port Forwarding and DMZ for various networking applications
Supports DHCP server in WISP mode

RF Interface Characteristics

Built-in 8dBi dual-polarization antenna
High output power up to 400mW with multiply-adjustable transmit power control

Outdoor Environmental Characteristics

IP55 rating
Passive Power over Ethernet design
Operating temperature: -20~70°C

Multiple Operation Modes and Wireless Features

Multiple operation modes: AP, Client Bridge, Client Router (WISP), WDS, Repeater
WMM (Wi-Fi multimedia) provides higher priority to multimedia transmitting over wireless
Wireless Traffic Shaping to control the upload/download bandwidth
Wi-Fi scheduler allows to enable or disable based on predefined schedule

Secure Network Connection

Full encryption supported: 64-/128-/152-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK and 802.1X RADIUS authentication
Supports 802.1Q VLAN pass-through over WDS and SSID-to-VLAN mapping
Supports up to 50 entries of MAC address filtering

Easy Installation and Management

Multilingual Web User Interface: English, Spanish, French, German, Portuguese, Russian, Simplified Chinese
CLI command and SNMP-based management interface
Self-healing mechanism through system auto reboot setting
System status monitoring through remote Syslog Server and Device Discovery
Diagnostic tools include Ping, Traceroute, Speed
Planet Smart Discovery Utility allows administrator to discover and locate each AP

Specifications

Hardware
Standard Support	IEEE 802.11b/g/n IEEE 802.3 IEEE 802.3u IEEE 802.3x
Memory	64 Mbytes DDR SDRAM 16 Mbytes Flash
PoE	Passive PoE
Interface	Wireless IEEE 802.11b/g/n, 2T2R PoE LAN (LAN 1): 1 x 10/100BASE-TX, auto-MDI/MDIX, 24V passive PoE In LAN 2: 1 x 10/100BASE-TX, auto-MDI/MDIX
Button	Reset button
LED	PWR, LAN, WLAN, Signal Strength
Antenna	Built-in 8dBi directional antenna with dual polarization [Port1] HPBW Horizontal: 78 degrees HPBW Vertical: 45 degrees [Port2] HPBW Horizontal: 54 degrees HPBW Vertical: 59 degrees
Data Rate	IEEE 802.11b: 1, 2, 5.5, 11Mbps IEEE 802.11g: up to 54Mbps IEEE 802.11n (20MHz): up to 150Mbps IEEE 802.11n (40MHz): up to 300Mbps
Media Access Control	CSMA/CA
Modulation	Transmission/Emission type: OFDM Data Modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band	2.412GHz - 2.472GHz
Operating Channels	United States -- FCC: 2.414~2.462GHz (11 channels) Europe -- ETSI: 2.412~2.472GHz (13 channels)
Max. Transmit Power (dBm)	FCC : IEEE 802.11b/g/n: up to 26 ± 2dBm ETSI : IEEE 802.11b/g/n: < 20dBm (EIRP)
Receiver Sensitivity (dBm)	IEEE 802.11b: -95/ -93dBm (1~2/ 5.5~11Mbps) IEEE 802.11g: -95/ -93/ -92/ -80/ -77/ -75dBm (6/ 9~18/ 24/ 36/ 48/ 54Mbps) IEEE 802.11n: MCS0/ MCS8 : -95dBm MCS1/ MCS9 : -93dBm MCS2/ MCS10 : -92dBm MCS3/ MCS11 : -90dBm MCS4/ MCS12 : -86dBm MCS5/ MCS13 : -83dBm MCS6/ MCS14 : -76dBm MCS7/ MCS15 : -73dBm
Power Consumption	Maximum 7.2W
Power Requirements	LAN1 24V DC, 0.6A/ Passive PoE Pin 4, 5 V DC+ Pin 7, 8 V DC-
Environment and Certification
Operating Temperature	-20~70 degrees C
Operating Humidity	10~90% (non-condensing)
IP Level	IP55
Regulatory	CE, FCC, RoHS
Software
LAN	Static IP Dynamic IP DHCP server in WISP mode Supports 802.1d STP (Spanning Tree Protocol)
WAN Connection Type (WISP Mode only)	Static IP Dynamic IP PPPoE PPTP
Firewall	Offers DoS protection to guard user's content network against DoS attacks Built-in DMZ and Port Forwarding VPN Pass-through: PPTP Pass-through L2TP Pass-through IPSec Pass-through
Wireless Modes	Access Point Client Bridge WDS (AP/Bridge/Station) Client Router (WISP)/Client AP Router (WISP+AP) Repeater
Channel Width	20MHz, 40MHz
Encryption Type	64/128/152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security	Enable/Disable SSID Broadcast Wireless MAC address filtering up to 50 entries VAP Separation, Station Separation
Max. SSIDs	Up to 4
Max. Wireless Clients	Max. 64 (Suggested 32, depending on usage)
Max. WDS Peers	Up to 4
Wireless QoS	Supports Wi-Fi Multimedia (WMM) Supports Wireless Traffic Shaping per Radio
Wireless Advanced Control	Auto Channel Selection Auto Transmit Power by Regular Domains Client Limit Control Distance Control (Auto Ack Timeout) Wi-Fi Schedule
Status Monitoring	Connection Status Device Discovery, PLANET Smart Discovery Wireless Client List/WDS Link List DHCP Client Table System Log supports remote syslog server Signal Strength LEDs in Client Bridge and WDS Station modes
VLAN	VLAN pass-through over WDS, SSID-to-VLAN mapping Management VLAN (VID: 1~4094)
Self Healing	Supports auto reboot settings
NTP	Network Time Management
Management	Web-based UI, CLI (Command Line Interface) supported Configuration backup and restore SNMP v1/v2c/v3 support, MIB I/II, Private MIB
Diagnostic Tools	Built-in Ping, Trace Route, Speed Test Tools

Het spijt ons ... Dit product is niet meer beschikbaar