For the places difficult to find the power outlet, the IGTP-80xT series provides the easiest way to power network equipment such as PTZ (Pan, Tilt & Zoom) IP cameras, speed dome IP cameras, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a/b/g/n) wireless LAN access points and other network devices that need higher power to function normally. For instance, users can flexibly install the security IP camera, wireless access point and other IEEE 802.3at / IEEE 802.3af compliant network equipment in the public areas such as stations, freeways, airports and campuses for surveillance and wireless roaming needs.

Features

Physical Port

1-port 10/100/1000Mbps RJ-45 interface, auto-negotiation and auto MDI / MDI-X

1-port Data + Power output, 802.3af / 802.3at PoE standard compatible
10/100/1000Base-T: 1-Port Cat. 5/5e/6 UTP cable, up to 100 meters

1-port Gigabit Fiber Interface

LC Fiber Interface (Varying on SFP Module, 100/1000 dual mode support)

Hardware

LED Indicators

System: Power 1, Power 2 and Fault LED
Fiber port: LNK / ACT
10/100/1000Base-T port: LNK / ACT, PoE In-use

DIP switch: LFP (Link Fault Pass-through) mode selection

IEEE 802.3af / 802.3at PoE

Complies with IEEE 802.3af and IEEE 802.3at standard, End-Span PSE
24V / 48V DC Power Input for PoE
Provides DC 52V power over RJ-45 Ethernet cable to devices with Ethernet port
Supports PoE Power up to 30 watts for PoE port
Auto-detects PoE IEEE 802.3at / IEEE 802.3af equipment, protecting the devices from being damaged by incorrect installation
Remote power feeding up to 100m
IEEE 802.3at / IEEE 802.3af splitter devices compatible

Industrial Case / Installation

IP30 aluminum metal case protection
DIN rail and wall mount design
24 and 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power
Supports EFT protection 6000V DC for power line
Supports 6000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature

Specifications
10/100/1000Base-T Port	1-Port RJ-45 interface, auto-negotiation and auto MDI / MDI-X
1000Base-X Fiber Interface	IGTP-802T: SC IGTP-802TS: SC IGTP-805AT: SFP (LC)
Fiber Cable	Vary on SFP Module
Cable Distance	IGTP-802T: 220m / 550m IGTP-802TS: 10km IGTP-805AT: Vary on SFP Module
Optical Frequency	IGTP-802T: 850nm IGTP-802TS: 1310nm IGTP-805AT: Vary on SFP Module
Launch Power	Vary on SFP Module
Receive Sensitivity	IGTP-802T: -13.5dBm IGTP-802TS: -14.4dBm IGTP-805AT: Vary on SFP Module
Maximum Input power	IGTP-802T: -18dBm IGTP-802TS: -20dBm IGTP-805AT: Vary on SFP Module
IEEE 802.3at / 802.3af PoE Port	1, End-Span, 1/2(+), 3/6(-)
LED Indication	System: Power 1, Power 2 and Fault LED (Green) Fiber port: LNK / ACT (Green) 10/100/1000Base-T port: LNK / ACT, PoE In-use (Green / Orange)
Link Fault Pass-through DIP Switch	ON / OFF
Flow Control	Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
Maximum Frame Size	9216 bytes
Power Requirements	24V DC or 48V DC, redundant power with polarity reverse protect function
Enclosure	IP30 aluminum metal case
Dimensions (W x D x H)	135 x 87 x 32mm
Weight	IGTP-802T / IGTP-802TS: 510g IGPT-805AT: 500g
Installation	DIN rail kit and wall mount ear
ESD Protection	6KV DC
EFT Protection	6KV DC
Alarm	Provides one relay output for power fail Alarm relay current carry ability: 1A @ DC 24V
Speed	Twisted-pair: 10/20Mbps for half / full-duplex, 100/200Mbps for half / full duplex 1000/2000Mbps for full duplex Fiber-Optic: 200Mbps / 2000Mbps for full-duplex
Network Cables	10/100/1000Base-T: 2-Pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters) EIA / TIA-568 100-ohm STP (maximum 100 meters) 100Base-FX / 1000Base-SX / LX: Multi-mode: 50/125um or 62.5/125um optic fiber Single-mode: 9/125um optic fiber
Power Consumption	24V: 33 watts / 112BTU, 48V: 31 watts / 105BTU (With PoE)
Power over Ethernet
PoE Standard	IEEE 802.3af / 802.3at High Power over Ethernet / PSE
PoE Power Supply Type	End-Span
PoE Power Output	52V DC. 15.4 watts 52V DC. 30 watts
Power Pin Assignment	1/2(+), 3/6(-)
Standards Conformance
Standards Compliance	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX / FX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-SX / LX Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at High Power over Ethernet
Regulation Compliance	FCC Part 15 Class A, CE
Stability Testing	IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration)
Environmental Specifications
Temperature	Operating: -30~75 degrees C Storage: -40~85 degrees C
Humidity	Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing)

We are sorry, this product is not available anymore