Providing 24 10/100BASE-TX PoE+ ports, in-line power interfaces and two Gigabit TP/SFP combo interfaces, the FGSW-2624HPS4 can easily build an IP camera system for the enterprises where its power is centrally controlled. It can work with one 25-channel NVR to perform comprehensive security monitoring with 24 IP cameras via one Gigabit TP/SFP combo port. The FGSW-2624HPS4 comes with non-blocking design, desktop size and SFP fiber-optic modules, bringing flexibility to building a network infrastructure at a low cost.

High-performance PoE Network Connectivity

All of its ports are 802.3af/at compliant, thus making high-performance Fast Ethernet network connectivity with PoE IP telephones, PoE IP cameras, PoE wireless access points and other devices possible, all at reasonable costs. The FGSW-2624HPS4 improves the network efficiency and protects the network clients with its following powerful features:

Layer 2 to Layer 4 security
QoS, 802.1Q VLAN, static trunk, LACP
Multicast IGMP snooping

Physical Port

24 10/100BASE-TX RJ45 copper ports with IEEE 802.3at/af PoE+ injector function
2 10/100/1000BASE-T Gigabit RJ45 copper ports
2 1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-26
Reset button for system factory default

Switching

Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
Automatic address learning and address aging
Supports CSMA/CD protocol

Power over Ethernet

Complies with IEEE 802.3at Power over Ethernet Plus
Complies with IEEE 802.3af Power over Ethernet
Up to 24 ports of IEEE 802.3af/802.3at devices powered
Supports PoE Power up to 30 watts for each PoE port
370-watt PoE budget
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 250m via extend mode
PoE Management
- Per port PoE function enable/disable
- Per port PoE operation mode selection
- Per PoE port power budget control
- PD classification detection and PoE consumption usage status
Intelligent PoE features
- PD alive check
- PoE port sequence
- PoE schedule

Layer 2 Features

Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
Supports VLAN
- Port-based VLAN, up to 26 VLAN groups
- IEEE 802.1Q tagged VLAN
- Protocol VLAN
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- GVRP
- Voice VLAN
Supports Spanning Tree Protocol
- STP (IEEE 802.1D Spanning Tree Protocol)
- RSTP (IEEE 802.1w Rapid Spanning Tree Protocol)
- MSTP (IEEE 802.1s Multiple Spanning Tree Protocol)
- STP BPDU filtering, BPDU Guard
Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP)
- 1 LACP group, up to 2 ports per LACP group
- Cisco ether-channel (static trunk)
- 1 trunk group, up to 2 ports per trunk group
Provides port mirror (many-to-1)
Loop detection

Quality of Service

Ingress/Egress Rate Limit per port bandwidth control
Storm Control support
- Broadcast/ Multicast /DLF (Destination Lookup Fail)/ARP/ICMP
Traffic classification
- IEEE 802.1p Qos/CoS
- TCP/UDP/DSCP/IP precedence of IPv4/IPv6 packets
Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

Supports IPv4 IGMP snooping v1/ v2 and v3
Supports IPv6 MLD snooping v1, v2

Security

Access Control List
- IPv4/IPv6 IP-based ACL
- MAC-based ACL
Port-MAC-IP Address Binding
- Port-MAC-IP Port Setting
- Port-MAC-IP Entry Setting
MAC Address Binding
- Static MAC
- MAC Filtering
DHCP snooping to filter distrusted DHCP messages
ARP Inspection discards ARP packets with invalid MAC address to IP address binding

Management

IPv4 and IPv6 dual stack management
Switch management interface
- Web switch management
- Telnet command line interface
- SNMP v1, v2c and v3
BOOTP and DHCP for IP address assignment
System maintenance
- Firmware upgrade via HTTP
- Configuration upload/download through web interface
- Hardware-based reset button for system reset to factory default
SNTP Network Time Protocol
Link Layer Discovery Protocol (LLDP)
Event message logging to remote Syslog server
PLANET Smart Discovery utility

Specifications

Hardware Specifications

Copper Ports: 24 10/100BASE-TX RJ45 Auto-MDI/MDI-X ports
PoE Injector Port: 24 802.3af/802.3at PoE+ injector ports
Gigabit Copper Ports: 2 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots: 2 1000BASE-X SFP interfaces, shared with Port-25 to Port-26
Console: 1 RS232-to-RJ45 serial port (115200, N, 8, 1)
Reset Button:
- < 5 sec: System reboot
- > 5 sec: Factory default
LED Indicators:
- System:
  - Power (Green)
  - SYS (Green)
- 10/100TX RJ45 Interfaces (Port 1 to Port 24):
- LNK/ACT (Green), PoE-in-Use (Amber)
- 10/100/1000BASE-T RJ45 / SFP Interfaces (Port 25 to Port 26):
- LNK/ACT 10/100 (Orange), 1000 (Green)
Thermal Fan: 2
Power Requirements: 100~240V AC, 50/60Hz, 6.5A (max.)
Power Consumption/Dissipation: Max.413 watts/1409BTU
Dimensions (W x D x H): 440 x 208 x 44 mm, 1U height
Weight: 2787g
Enclosure: Metal

Switching

Switch Architecture: Store-and-Forward
Switch Fabric: 8.8Gbps/non-blocking
Switch Throughput@64bytes: 6.55Mpps @64bytes
MAC Address Table: 16K entries
Shared Data Buffer: 4Mbits
Flow Control:
- IEEE 802.3x pause frame for full duplex
- Back pressure for half duplex
Jumbo Frame: 16K bytes

Power over Ethernet

PoE Standard:
- IEEE 802.3af Power over Ethernet/PSE
- IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type: Mid-span
Power Pin Assignment: 4/5 (+), 7/8 (-)
PoE Power Output:
- Per Port 53 DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
- Per Port 53 DC, 600mA. Max. 30 watts (IEEE 802.3at)
PoE Power Budget: 370 watts
Number of PDs, 7 watts: 24
Number of PDs, 15.4 watts: 24
Number of PDs, 30 watts: 12

Layer 2 Functions

Port Mirroring:
- TX/RX/both
- Many-to-1 monitor
VLAN:
- Port-based VLAN, up to 26 VLAN groups
- IEEE 802.1Q tagged VLAN
  - Up to 256 VLAN groups, out of 4094 VLAN IDs
- Protocol VLAN
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- GVRP
- Voice VLAN
Link Aggregation: IEEE 802.3ad LACP supports one 2-port trunk group; static trunk supports one 2-port trunk group
Spanning Tree Protocol:
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- STP BPDU filtering, BPDU Guard
IGMP Snooping: IPv4 IGMP snooping v1/ v2 and v3
MLD Snooping: IPv6 MLD snooping v1, v2
QoS:
- Ingress/Egress Rate Limit per port bandwidth control
- Storm Control support
- Broadcast/ Multicast /DLF (Destination Lookup Failure)/ARP/ICMP
- Traffic classification
  - IEEE 802.1p Qos/CoS
  - TCP/UDP/DSCP/IP precedence of IPv4/IPv6 packets
- Strict priority and Weighted Round Robin (WRR) CoS policies

Security Functions

Access Control List:
- IPv4/IPv6 IP-based ACL
- MAC-based ACL
MAC Security:
- Port-MAC-IP Address Binding
- Port-MAC-IP Port Setting
- Port-MAC-IP Entry Setting
- MAC Address Binding
- Static MAC

Management Functions

System Configuration:
- Console and Telnet command line interface
- Web browser
- SNMP v1, v2c
Secure Management Interfaces: SNMP v3, SSH, SSL
- System Management IPv4 and IPv6 dual stack management:
- BOOTP and DHCP for IP address assignment
- System maintenance
  - Firmware upgrade via HTTP
  - Configuration upload/download through web interface
  - Hardware-based reset button for system reset to factory default
- SNTP Network Time Protocol
- Link Layer Discovery Protocol (LLDP)
- PLANET smart discovery utility

Standards Conformance

Regulatory Compliance: FCC Part 15 Class A, CE
Standards Compliance:
- EEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3z Gigabit SX/LX
- IEEE 802.3ab Gigabit 1000T
- IEEE 802.3x flow control and back pressure
- IEEE 802.3ad port trunk with LACP
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1w Rapid Spanning Tree Protocol
- IEEE 802.1s Multiple Spanning Tree Protocol
- IEEE 802.1p Class of Service
- IEEE 802.1Q VLAN tagging
- IEEE 802.1ab LLDP
- IEEE 802.3af Power over Ethernet
- IEEE 802.3at Power over Ethernet Plus
- RFC 2068 HTTP
- RFC 1112 IGMP version 1
- RFC 2236 IGMP version 2
- RFC 3376 IGMP version 3
- RFC 2710 MLD version 1
- RFC 3810 MLD version 2

Environment

Operating:
- Temperature: 0 ~ 50 degrees C
- Relative Humidity: 10 ~ 90% (non-condensing)
Storage:
- Temperature: -10 ~ 70 degrees C
- Relative Humidity: 5 ~ 90% (non-condensing)

We are sorry, this product is not available anymore