Businesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers, workstations, storage devices, and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy CAT5e / CAT6 cables.
That is why NETGEAR launched its new Multi-Gigabit Smart Managed Pro Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the MS510TX and MS510TXPP give the exact speed required, with no downgrade. Also, the new NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle.
Access, Aggregation or Collapsed Core: You can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.
| Ports & interfaces |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Basic switching RJ-45 Ethernet ports type | 10G Ethernet (100/1000/10000) |
| Gigabit Ethernet (copper) ports quantity | 4 |
| 2.5G Ethernet (copper) ports quantity | 2 |
| 10G Ethernet (copper) ports quantity | 1 |
| SFP+ module slots quantity | 1 |
| Console port | RJ-45 |
| USB 2.0 ports quantity | 1 |
| Power connector | DC-in jack |
| |
| Weight & dimensions |
| Width | 440 mm |
| Depth | 204 mm |
| Height | 43 mm |
| Weight | 2.61 kg |
| |
| Power |
| Power source | AC |
| Power supply included | N |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power consumption (typical) | 19.39 W |
| Power consumption (max) | 234.31 W |
| |
| Operational conditions |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating relative humidity (H-H) | 0 - 90% |
| Storage relative humidity (H-H) | 0 - 95% |
| Operating altitude | 0 - 3000 m |
| Heat dissipation | 799.5 BTU/h |
| |
| Network |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| 10G support | N |
| Full duplex | Y |
| Half duplex | Y |
| Flow control support | Y |
| Link aggregation | Y |
| Broadcast storm control | Y |
| Spanning tree protocol | Y |
| Auto-negotiation | Y |
| VLAN support | Y |
| Number of VLANs | 256 |
| |
| Data transmission |
| MAC address table | 16000 entries |
| Switching capacity | 78 Gbit/s |
| Latency (10 Gbps) | 2.36 µs |
| Static route | Y |
| Number of static routes | 32 |
| Jumbo frames support | Y |
| Jumbo frames | 10000 |
| Packet buffer memory | 3 MB |
| |
| Security |
| DHCP features | DHCP server, DHCP client |
| Access Control List (ACL) | Y |
| Access Control List (ACL) rules | 164 |
| IGMP snooping | Y |
| |
| Management features |
| Switch type | Managed |
| Switch layer | L2/L3/L4 |
| Quality of Service (QoS) support | Y |
| Web-based management | Y |
| ARP inspection | Y |
| |
| Design |
| Rack mounting | Y |
| Product colour | Grey |
| LED indicators | Y |
| Number of fans | 1 fan(s) |
| Safety | IEC 60950-1:2005, A1:2009+A2:2013, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, 60950.1:2015, GB4943.1-2011, YD/T993-1998; GB/T9254-2008, CNS 14336-1 |
| Certification | EN 55032:2012+AC:2013/CISPR 32:2012, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55024:2010, VCCI-CISPR 32:2016, AS/NZS CISPR 32:2013, GB4943.1-2011; YD/T993-1998; GB/T9254-2008, 47 CFR FCC, ANSI C63.4:2014, ICES-003:2016, ANSI C63.4:2014, CNS 13438 |
| |
| Power over Ethernet (PoE) |
| Power over Ethernet (PoE) | Y |
| Power over Ethernet plus (PoE+) ports quantity | 8 |
| Total Power over Ethernet (PoE) budget | 180 W |
| |
| Performance |
| Built-in processor | Y |
| Processor frequency | 800 MHz |
| Noise level | 28.8 dB |
| Mean time between failures (MTBF) | 376434 h |
| |
| Logistics data |
| Harmonized System (HS) code | 85176990 |
| |
| Multicast features |
| Multicast support | Y |
| Multicast MAC address table | 512 entries |
| |
