performance max. 30 W useable for tandem circuits bajonett 13 mm pin distance Operating temperature from / to (°C): -20°c - +100°c input voltage 100-240 V AC diameter 21 cm diameter 21 mm, 39,5 mm length 39,5 mm
This accessory is designed for any of the Integral IP67 Flexible LED Strip range. Suitable for Integral Flexible Strips (IP67) Physical Data Weight (Unpackaged Single Unit): 1g
This accessory is designed for any of the Integral IP33 and IP67 Flexible LED Strip range. Suitable for Integral Flexible Strips (IP33 and IP67) Physical Data Weight (Unpackaged Single Unit): 0g
.JPG)
This 5.9W retro-fit Integral LED Mini Globe (large screw base) delivers a warm light and brightness, similar to a 40W filament bulb. It features high output LEDs and an anti-glare refractor. Ideal for living rooms, dining rooms and bedrooms, in classic or modern wall or floor/table lamp fittings.…
This profile mounting bracket (clip) is designed for Recessed Aluminium Profile with product codes - LAMP255/LAMP265 Suitable for LAMP255 and LAMP265
This profile mounting bracket (clip) is designed for Corner Surface Mounted Aluminium Profile with product codes - LAMP245/LAMP250. Suitable for LAMP245/LAMP250
This profile mounting bracket (clip) is designed for Surface Mounted Aluminium Profile with product codes - LAMP275/LAMP285. Suitable for LAMP275 and LAMP285
This profile mounting bracket (clip) is designed for Surface Mounted Aluminium Profile with product codes - LAMP280/LAMP290. Suitable for LAMP280 and LAMP290
This profile mounting bracket (clip) is designed for Recessed Aluminium Profile with product codes - LAMP260/LAMP270 Suitable for LAMP260 and LAMP270
This accessory is designed for any of the Integral IP67 Flexible RGB LED Strip range with 12mm width. Suitable for Integral Flexible SMD5050 RGB Strips (IP67) Physical Data Weight (Unpackaged Single Unit): 0g
.JPG)
This 5.9W retro-fit Integral LED Candle (frosted finish, large screw, white base) delivers a warm light and brightness, similar to a 40W filament bulb. It features high output LEDs and an anti-glare refractor. Ideal for living rooms, dining rooms, bedrooms and hotels, in classic or modern wall or floor/table lamp fittings and chandeliers.…
This profile endcap with cable entry is designed for Recessed Aluminium Profile with product codes - LAMP260/LAMP270. Suitable for LAMP260 and LAMP270
This 2M Surface Mounted Aluminium Profile (also known as Extrusion) is designed for any Integral IP33 and IP65 Flexible LED Strip range with 8mm and 10mm width. A frosted diffuser (cover) is included. Suitable for many applications such as lighting for furniture (bookcases, wardrobes), glass cabinets (jewellery), counter units (reception desks, bars) and decorative ceiling lighting (coving). Accessories including endcaps, endcaps with cable entry and mounting bracket (clips) are available to…
This profile endcap is designed for Recessed Aluminium Profile with product codes - LAMP260/LAMP270. Suitable for LAMP260 and LAMP270
This profile endcap with cable entry is designed for Recessed Aluminium Profile with product codes - LAMP255/LAMP265. Suitable for LAMP255 and LAMP265
This 5.9W retro-fit Integral LED Candle (clear finish, small screw, white base) delivers a warm light and brightness, similar to a 40W filament bulb. It features high output LEDs and an anti-glare refractor. Ideal for living rooms, dining rooms, bedrooms and hotels, in classic or modern wall or floor/table lamp fittings and chandeliers.…
This profile endcap is designed for Recessed Aluminium Profile with product codes - LAMP255/LAMP265. Suitable for LAMP255 and LAMP265
.JPG)
This 5.5W retro-fit Integral LED Classic Globe (GLS) (large screw base) delivers a warm light and brightness, similar to a 40W filament bulb. It features high output LEDs and an anti-glare refractor. Ideal for low level light areas such as hallways, bedrooms, cupboards or where light is always on.…
This profile endcap is designed for Corner Surface Mounted Aluminium Profile with product codes - LAMP245/LAMP250. Suitable for LAMP245 and LAMP250
This profile endcap is designed for Surface Mounted Aluminium Profile with product codes - LAMP275/LAMP285. Suitable for LAMP275 and LAMP285
This profile endcap with cable entry is designed for Surface Mounted Aluminium Profile with product codes - LAMP275/LAMP285. Suitable for LAMP275 and LAMP285
LED reflector 2 WBase GU4, replaces 22 W, MR11 spotlight…
.JPG)
This 5.5W retro-fit Integral LED Mini Globe (large screw base) delivers a warm light and brightness, similar to a 40W filament bulb. It features high output LEDs and an anti-glare refractor. Ideal for living rooms, dining rooms and bedrooms, in classic or modern wall or floor/table lamp fittings.…
This accessory is designed for any of the 3W and 6W per metre Integral IP33 Flexible LED Strip range. Suitable for 3W and 6W per metre Integral Flexible Strips (IP33) Physical Data Weight (Unpackaged Single Unit): 1g
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)