Model: BKT BKTS650
Cable U/UTP LSOH CAT6A FULL COPPER 500M
Specifications
Application
- Primary (Campus), Secondary (Riser), Tertiary (Horizontal)
- IEEE 802.3: 10BASE-T, 100BASE-T, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T
- IEEE 802.5: 16MB, ISDN, FDDI, ATM
- Power over Ethernet (PoE / PoE+)
Standards
- EN 50173-1
- EN 50288-11-1
- EN 50399
- EN50575
- ISO/IEC 11801-1
- IEC 61156-5
- ANSI/TIA 568.2
- IEEE 802.3af/at
Flame Resistance
- LSHF (LSOH, FRNC): IEC 60332-1, IEC 61034, IEC 60754-2
- CPR: Eca - EN 50399, EN 50575
Construction
- Conductor: Bare copper wire Ø 0,54mm (AWG 23)
- Insulation: Polyethylene Ø 1,101 mm
- Twisting: 2 cores to the pair
- Cable lay up: 4 pairs to the core separated with non metallic cross separator
- Sheath: LSHF (LSOH, FRNC) blue RAL 5024
Mechanical Properties
- Bending radius:
- installation: 4 x D
- installed: 8 x D
- Temperature range
- during operation: -20°C to +60°C
- during installation: 0°C to +50°C
Electrical Properties at 20°C
- DC Loop Resistance: ? 155 ?/km
- Resistance unbalance: ? 2 %
- Insulation resistance: [500 V] ? 5000 M?km
- Mutual capacitance: [800 Hz] nom. 56 nF/km
- Capacitance unbalance: [pair/ground] ? 1600 pF/km
- Characteristic impedance: [100 MHz] 100 ± 15 ?
- Nominal Velocity of Propagation: NVP 69 %
- Propagation Delay: ? 535 ns/100m
- Delay Skew: ? 45 ns/100m
- Test Voltage: [DC, 1min] 1000 V
- Coupling attenuation: ? 40 dB
- Separation clasification according to EN 50174-2: „b”
Useful Properties
- Fire Load: 585 MJ/km-0,162 kWh/m
- Tensile force: 100 N