Model: Planet LRP-101CE
1-Port Long Reach PoE over Coaxial Extender
Working Hand in Hand as a Kit
Working in pair with PLANET LRP-101CH Long Reach PoE Injector, powered by either the external DC power adapter or PoE+ Ethernet switch, the LRP-101CEs 802.3at standard PoE output goes to a PoE PD. The LRP-101-C-KIT, made up of the LRP-101CH and LRP-101CE, can be widely used in Intelligent Transportation Systems (ITS), traffic surveillance, security monitoring, automation control, intelligent residential districts and so on.
Features
Physical Port
Power over Ethernet
Industrial Case / Installation
Specifications | |||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ethernet Interface | Copper: 10/100BASE-TX RJ45 auto-negotiation/ auto-MDI/MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2(+), 3/6(-) Data Rate: 100/100Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522bytes |
||||||||||||||||||||||||||
Long Reach PoE Interface | Connectivity: 1 x BNC female Long Reach PoE over coaxial PD (Powered Device) Power Input: 37~56V DC* Power Pin Assignment: BNC center pole : DC+ / Hi BNC shield : DC - / Lo Cabling: Coaxial cable: 75 ohm RG-6/U cable, less than 12/1,000ft. RG-59/U cable, less than 30/1,000ft. Maximum Distance: Max. 200m with PoE+ output (656ft.) Max. 600m with PoE output (1,968ft.) Max. 1,200m without PoE output (3,937ft.) Long Reach Ethernet Standard: IEEE 1901 Modulation Type: Wavelet-OFDM Security: 128-bit AES encryption Frequency Band: 2 ~ 28 MHz Encryption: AES 128-bit Performance**
Multiple Nodes: Supports up to 4 LRP extenders within 1km LRP Compatibility: With power over coaxial input LRP-101CH 1-Port LRP Injector LRP-822CS 8-Port LRP over Coax Switch LRP-1622CS 16-Port LRP over Coax Switch |
||||||||||||||||||||||||||
LED Indicators | 4 x LEDs PWR LRP LNK PoE-in-use LNK/ACT |
||||||||||||||||||||||||||
ESD Protection | 4KV DC | ||||||||||||||||||||||||||
Enclosure | Metal case | ||||||||||||||||||||||||||
Installation | Wall mount or DIN rail with optional kit | ||||||||||||||||||||||||||
Dimensions (W x D x H) | 94 x 70 x 26 mm | ||||||||||||||||||||||||||
Weight | 375g | ||||||||||||||||||||||||||
Power Requirements | BNC Power over Coaxial Input: 44~56V DC | ||||||||||||||||||||||||||
Standards Conformance | |||||||||||||||||||||||||||
Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet Plus(802.3at Type 2) |
||||||||||||||||||||||||||
Regulation Compliance | FCC Part 15 Class A, CE | ||||||||||||||||||||||||||
Environment | |||||||||||||||||||||||||||
Temperature | Operating: -20~70 degrees C Storage: -40~75 degrees C |
||||||||||||||||||||||||||
Humidity | Operating: 5~95% (Non-condensing) Storage: 5~95% (Non-condensing) |