KEY FEATURES
Physical Port
- 8-Port 10/100/1000BASE-T Gigabit RJ-45 copper with 4-Port IEEE 802.3at / af PoE Injector (Port-1 to Port-4)
Power over Ethernet
- Complies with IEEE 802.3at High Power over Ethernet end-span PSE
- Backward compliant with IEEE 802.3af Power over Ethernet end-span PSE
- Up to 4 ports of IEEE 802.3af / 802.3at devices powered
- Supports PoE Power up to 30.8 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100 meters
Layer 2 Features
- High performance Store and Forward architecture; runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
- 9K Jumbo frame supports in 1000Mbps duplex mode
- Automatic address learning and address aging
Industrial Case / Installation
- Compact size, wall-mounted, magnetic wall mount and DIN-rail design
- IP30 metal chassis
- Supports -10 to 60 degrees C operating temperature
- Supports EFT 6000VDC protection for power line
- Supports ESD 6000VDC Ethernet protection
- LED indicators for real-time PoE usage
- 48V~56V DC input range for booting with polarity reverse protect function
SPECIFICATIONS
Hardware Specifications
- Network Connector:
- 8-Port RJ-45 for 10/100/1000BASE-T
- PoE Inject Port:
- 4-Port with 802.3af / 802.3at PoE injector function (Port-1 to Port-4)
- Switch Architecture:
- MAC Address Table:
- 8K MAC address table with auto learning function
- Data Buffer:
- Switch Fabric:
- Switch Throughput:
- Jumbo Frame:
- Flow Control:
- IEEE 802.3x pause frame for full duplex
- Back pressure for half duplex
- LED Indicators:
- Power LED: Power (Green)
- PoE Power Usage LED: 30W, 60W, 90W, 120W (Green)
- PoE Port(Port-1 to Port-4):
- PoE-in-Use (Orange)
- LNK/ACT (Green)
- 10/100/1000BASE-TX Port (Port-5 to Port-8):
- 1000 (Green)
- LNK/ACT (Green)
- Connector:
- Removable 3-pin terminal block for power input:
- Pin 1/2 for DC Power
- Pin 3 for earth ground
- DC power jack with 2.0mm central pole
- Power Requirements:
- Power Consumption:
- ESD Protection:
- EFT Protection:
- Enclosure:
- Dimensions (W x D x H):
- Weight :
- Installation:
- Wall mount, magnetic wall mount and DIN-rail kit
Power over Ethernet
- PoE Standard:
- IEEE 802.3af / 802.3at Power over Ethernet PSE
- PoE Power Supply Type:
- PoE Power Output :
- IEEE 802.3af Standard - Per port 48V~56V DC (depending on the power supply), max. 30 watts
- IEEE 802.3at Standard - Per port 50V~56V DC (depending on the power supply), max. 30 watts
- Power Pin Assignment:
- * PoE Power Budget:
- 120 watts (depends on power input)
- Max. Number of Class 2 PD:
- Max. Number of Class 3 PD:
- Max. Number of Class 4 PD:
* The actual power output may vary on the external power system with maximum 120 watts PoE budget for the switch.
Standard Conformance
- Standard Compliance:
- IEEE 802.3: Ethernet
- IEEE 802.3u: Fast Ethernet
- IEEE 802.3ab: Gigabit Ethernet
- IEEE 802.3x: Flow Control
- IEEE 802.3af: Power over Ethernet
- IEEE 802.3at: High Power over Ethernet
- Regulation Compliance:
- Stability Testing:
- IEC 60068-2-32 (Free fall)
- IEC 60068-2-27 (Shock)
- IEC 60068-2-6 (Vibration)
Environment
- Operating:
- Temperature: -10 ~ 60 degrees C
- Relative Humidity: 5 ~ 95% (non-condensing)
- Storage:
- Temperature: -20 ~ 70 degrees C
- Relative Humidity: 5 ~ 95% (non-condensing)
Accessory
- Standard Accessories:
- Users manual x1
- Magnetic kit x 1
- DIN-rail kit x 1
- Screws x 4
- Dust cap x 8